TACTICAL RIFLE ACCESSORIES
 
 
FTE Removable Muzzle break
This is a clamp on style break and can be easily removed for cleaning or installation of a Suppressor. Ports are to the sides to reduce ground blast. This is a very effective break!
Calibers .22 and up. Must be fit by a competent gunsmith. 3” long, 1.375” dia. 4140 Steel.
P/N 306-38 3/4-28 thread and .875” minimum Bbl diameter Weight: 7.9 oz.
P/N 306-38B 5/8-24 thread and .800” minimum Bbl diameter Weight: 7.9 oz.
 
Thruster Tactical Compensator
Designed to reduce the recoil impulse felt by the shooter and keep the muzzlerise to a minimum, ports are angles up to minimize ground blast. .95” dia and 2.375” long. Made from stainless steel. Must be installed by a Gunsmith.
P/N 306-30 3-4-28 thread
P/N 306-30A Unthreaded Gunsmith model
P/N 306-30B 5/8-24 thread
 

Co-Sine angle indicator mount
Gen 1
Machined aluminum mount allows you to mount the Sniper Tool Designs Angle Co-Sine indicator directly to your Picatinny base. Will fit any M1913 MIL STD mount, attaches with 2 soft point set screws so it will not mar your mount. Also fits M16/AR-15 flat top rifles. Weighs less than 1/2 oz. Anodized black.
P/N 306-37


Co-Sine angle indicator mount
Gen 2
Machined aluminum mount allows you to mount the Sniper Tool Designs Angle Co-Sine indicator directly to your Picatinny base. Will fit any M1913 MIL STD mount, attaches with 2 soft point set screws so it will not mar your mount. Also fits M16/AR-15 flat top rifles. Weighs less than 1/2 oz. Anodized black.
P/N 306-73
 

Sniper tool Design Angle Co-Sine Indicator Kit
Gen 1
Both the ACI and Badger ACI mount sold as
a unit. Weighs 1.2 oz.
P/N 306-37A


Sniper tool Design Angle Co-Sine Indicator Kit
Gen 2
Both the ACI and Badger ACI mount sold as
a unit. Weighs 1.2 oz.
P/N 306-73A



Maximized Recoil Lug
For use with the M700 series rifles. Thicker (.312” precision ground), taller, tapered and radiused corners on the bottom for ease of installation.
P/N 306-01 4142 Ordnance Steel
P/N 306-01S 416 Stainless Steel
 
Tactical Bolt Knob
Oversized bolt knob allows fast, easy access to bolt, even with gloved hands. No more holding the bolt handle with two fingers to pass the scope bell. The extra size and length gives unparalleled control of the bolt. Provides extra leverage for stuck rounds. 7075 T6 Aluminum alloy to keep the weight down and a Mil-spec Hardcoat anodized finsih to last a life time. Weight: 3 oz.
P/N 306-31
 

SIMRAD cap for Mk11
mod 0
Ring cap for attaching a SIMRAD night vision device. Will fit any of the Badger Ordnance 4 screw pattern rings. Will also fit Knights Armament rings.
P/N 306-71

 

Picatinny ring cap, 4 slot
This cap allows the use of lights, Laser and alternate sighting devices. Fits any Standard (4 screw) badger ring, Old style Leupold Mk 4 rings and Knights Armament rings. Made from Ordnance grade steel, Mil spec black oxide finish.
P/N 306-33 Weight: 2.2 oz.
P/N 306-34 for Max-50 rings Weight: 2.8 oz.
 
M14/M1A National Match Operating Rod Spring Guide
Made from 1 piece of prehard 4142 Ordnance steel. The body of the guide is fluted to reduce contact with the Spring while giving absolutely smooth operation.
P/N 223-05
 
M16 Style Extractor
This simple but effective design works just like the extractor in an M16 rifle. Will not pull out like other extractors if a sticky cartridge is encountered. Used by the Naval Surface Warfare Center in Mk 13 sniper rifles. Made from Pre-hardened 4142 steel. Gunsmith installation required.
P/N 306-91 Magnum calibers
P/N 306-92 Lapua/Rigby based calibers
 
MOUNTS & RAILS
 
 
Badger Ordnance IMUNS, Integrated Mount Universal Night Sight
Installs into any Accuracy International Chassis, replaces current Bipod mount and allows the mounting of any A/N PVS-22 type night vision optic. Side rail allows the mounting of a laser aiming device. Installation required, no permanent modification required. Weight: 12 oz.
P/N 310-10
 
Badger Ordnance

EFR, Embedded Front Rail
Allows the use of a Universal night site (A/N PVS-22) on virtually any tactical rifle stock. This mount is bedded into the forend of the rifle stock and allows for up to 7” of rail space due to its reversible top rail. Made from 7075 Aluminum alloy. Weight: 7.4 oz.
P/N 306-59

 
Badger Ordnance

SLAM, Side Laser Aiming Mount
Designed for the Mk 15 and M107 sniper rifles. The SLAM allows the mounting of a Laser aiming devise such as the PAQ-4, PEQ-2, VITAL and all other M1913 rail accessories. Simply mounts to any open space of top rail that is 4 slots wide. Made from 7075 Aluminum alloy. Weight: 2.4 oz.
P/N 306-107
 

TRIGGERGUARDS
 


P/N 306-02


P/N 306-03

M4 Triggerguard
A solid, Heavy Duty, one piece steel replacement for the standard Remington Aluminum guard. Extra wide and thick in the front and rear tang for increased clamping power. Uses standard socket head cap screws for maximum strength and interchangeability. Minor inletting required. Screws provided (in the white).
P/N 306-02 M700 Short action 8.6 oz
P/N 306-03 M700 Long action 9.7 oz
P/N 306-02A Aluminum Alloy 3.3 oz
P/N 306-03A Aluminum Alloy 3.8 oz
   

P/N 306-82


P/N 306-83

M5 Triggerguard
 The Badger BDM Triggerguard is a heavy-duty guard like our M4 but allows quick loading/unlaoding via a bullet proof 5 round magazine utilizing a time proven Paddle style mag release. 10 round magazines available for short action version only. The guard includes grade 5 TORX® screws and pre-made bedding pillars to guarantee exact fit and perfect function and one 5 round magazine. Made from Aircraft grade Aluminum and Hardcoat anodized black. Inleting required.
S/A guard w/ empty 5 rd mag 10.2 oz, L/A guard w/ empty 5 rd mag 13.7 oz
P/N 306-82 Short action, Standard Short action calibers NSN 1005-01-557-3086
P/N 306-83L Long action, Lapua
P/N 306-83M Long action, Magnum